Boring.

I spent a bit of time today tidying parts stripped off 05 KD 28 and parts bought for the rebuild – mainly so I could make sure I had what I needed for the engine rebuild.

Only progress today was honing the cylinder bores. I haven’t finished yet but the wear ridge has gone although it doesn’t quite look flat under light.

They need a little more work to cross hatch completely but I needed to charge drill batteries.

The somewhat dull job of painting the chassis continues! I flattened it and put another coat on. I think it is almost there bar some edges and corners. No pictures as it is just even more yellow!

Final coats on block, sump and timing case tomorrow after finishing honing bores and maybe even the final bits of the chassis. The springs need doing too!